Stone Partitions

Polycor Georgia marble offers beautiful, natural stone partitions in colors that complement any design décor, anywhere. And these materials are offered by America?s time-tested, true source for natural stone.

For both new construction and/or renovation work, no other product is more ideal for washrooms, shower stalls, dressing room partitions, and more. In addition to the stone panels, a very diverse offering of functional and attractive hardware items is offered as well. All materials meet local, state, or federal codes.

It is not uncommon for these products to last for five or six decades once installed, and still look and perform as if they were brand new. With low maintenance costs, a long lifecycle, virtually no water absorption, and the fact that they are vandal-resistant, stone partitions prove to be extremely cost-efficient.

Installation

Preparatory work: A solid sub-floor not more than 2 inches. Below finish floor and a masonry toilet wall should be provided for proper installation.

Methods

Partitions are assembled using chrome-plated hardware. Floor-mounted units are set on dowels into finish floor. Ceiling-hung units are bolted to overhead support. All ceiling-hung units must have a metal spline. All joints are sealed with non-staining sealants.

General Precautions

During construction the General Contractor shall protect all stone from staining or damage. Oily putty and plumbing sealants should never be used in contact with stone.

Benefits of using stone partitions (Marble stall toilet & shower compartment)
  • Single source responsibility
  • Cost cycle - Life time of building
  • Vandal & graffiti resistant
  • Low absorption 0.07% - 0.09%
  • High flexural strength
  • One call, one supplier, one source
Applications
  • Commercial and Institutional
  • Government, Health care, Colleges & Universities, Sports & Fitness Clubs
Polycor Available colors
  • 4 marble colors
  • 22 granite colors
Complete Package
  • Stone
  • Attaching Hardware
  • Doors
  • Door Hardware
Hardware
  • Chrome plated brass
  • Polished brass or stainless steel
Installations Methods
  • There are several methods by which stone toilet partitions can be installed
Design criteria

Oily putty and plumbing sealants should never be used in contact with stone.

Job Site Condition

For certain job conditions, it is preferable to furnish the stone un-drilled, and drill at the job site.

Sound Stones

Only sound stones, free of any cracks, defects, geological flaws, and voids, should be used.

Anchors

An alternate system that may be used is non staining dowels, pins, and wire anchors in lieu of chrome-plated hardware.

White Portland cement

Recommended for light-colored granite and marble. White Portland cement with a low alkali content is recommended for limestone.

The ceiling channel

To which the stile should be attached, shall be furnished and installed by the General Contractor.

Product Description
Types

Floor-mounted, ceiling-hung and floor to ceiling.

Finishes

Polished finish is standard.

Sizes

Custom according to design requirements and size limitations of selected stone.